EL5167

• Gain-of-1 bandwidth = 1.4GHz/gain-of-2 bandwidth = 800MHz增益为1带宽800MHz的带宽= = 1.4GHz/gain-of-2
• 6000V/μs slew rate 6000V/μs压摆率
• Single and dual supply operation from 5V to 12V单，双电源供电从5V至12V
• Low noise = 1.7nV/√Hz低噪声= 1.7nV /√Hz的
• 8.5mA supply current八点五毫安电源电流
• Fast enable/disable (EL5166 only)快速启用/禁用（EL5166只）
• 600MHz family - (EL5164 and EL5165) 600MHz的家庭 - （EL5164和EL5165）
• 400MHz family - (EL5162 and EL5163) 400MHz的家庭 - （EL5162和EL5163）
• 200MHz family - (EL5160 and EL5161) 200MHz的家庭 - （EL5160和EL5161）
• Pb-free available (RoHS compliant)无铅可用（符合RoHS）

The EL5166 and EL5167 amplifiers are of the current feedback variety and exhibit a very high bandwidth of 1.4GHz at A _V = +1 and 800MHz at A _V = +2. EL5166和EL5167的放大器的电流反馈和展示各种带宽，阿_V的1.4GHz的一个非常高= 1和2 _的 V = 800MHz以。 This makes these amplifiers ideal for today's high speed video and monitor applications, as well as a number of RF and IF frequency designs.这使得这些为今天的高速视频和监控应用，以及数字射频和中频频率设计放大器的理想选择。

With a supply current of just 8.5mA and the ability to run from a single supply voltage from 5V to 12V, these amplifiers offer very high performance for little power consumption.随着供应公正八点五毫安，并能够从单电源电压从5V至12V运行电流，这些放大器提供了非常高的小功率消耗。

The EL5166 also incorporates an enable and disable function to reduce the supply current to 13μA typical per amplifier.该EL5166还集成了一个启用和禁用功能，以减少电源电流13μA每个放大器的典型。 Allowing the CE pin to float or applying a low logic level will enable the amplifier.让CE脚悬空或应用低逻辑电平，使放大器。

The EL5167 is offered in the 5 Ld SOT-23 package and the EL5166 is available in the 6 Ld SOT-23 as well as the industry-standard 8 Ld SOIC packages.该EL5167是提供在5引脚SOT - 23封装，EL5166可在6引脚SOT - 23，以及工业标准的8引脚SOIC封装。 Both operate over the industrial temperature range of -40°C to +85°C.这两个工作在-40 ° C工业温度范围为85 ° C的